(set #nomui (cat "\n\nAmTalk uses Magic User Interface (MUI).\n\nThe installer has not found MUI: to be assigned, "
"therefore you AmTalk will not work correctly. You will need to install "
"MUI before running AmTalk."
)
)
(set #whereAmTalk "Where do you wish to install AmTalk. A directory called 'AmTalk' will be created if one is not there. If a copy of AmTalk is found it will be backed up.")
(set muiver "No Version Installed")
(set #newermui "\n\nAmTalk needs version 3.6 or higher of MUI installed to work correctly.\n\nNow would be a good time to Upgrade!\n\n It looks like you have: \n\n")
(set #nomuiarc "\nThe installer could not find the MUI dir in the archive. Because of this the MUI Classes used by AmTalk were not installed.\n\n If you are Updating AmTalk then this is not a problem. If it is your first time installing AmTalk you will need to get an archive with these files.")
(set #nompc "\nThe .MPC files for Voyager can not be installed to 'mui:libs/mui'")
(set #need-os "\n\nThe 68020 version of AmTalk needs version 3.6 or higher of the Amiga OS installed to work correctly.\n\n It looks like you have: \n\n")
(set #000used "\n\nThe 68000 version will be installed.")
(set #filethere1 "\n\nThe installer has found AmTalk version ")
(set #filethere2 " at ")
(set #filethere3 "\n\nThe file will be renamed to ")
(set #filethere4 " and it will then be moved to ")
(set #oktodelete1 "\nIs it ok to delete the older AmTalk binary so that the AmTalk Directory can be made?\n")
(set #oktodelete2 "\nIs it ok to delete the older _renamed_ AmTalk binary so that the AmTalk Directory can be made?\n")
(set #backuptoXXX "Back-UP to file named 'AmTalk")
(set #copyover "Copy Over Old Version")
(set #AmTalkfound "\nThe Installer has found a copy of AmTalk already installed. What do you want to do?\n")
(set #whereback "Where would you like to BackUp AmTalk to?")
(set #askcpu "\nCPU Check: What CPU does the machine have that you are installing AmTalk on? The installer has found:\n")
(set #no020found "\n\nThe 68020 Version of AmTalk , AmTalk020, was not found in this archive the 68000 version was installed.")
(set #newicon "\nDo you wish to copy over one of the AmTalk Icons from the archive? If you have any ToolTypes already set you should select no.\n")
(set #pickicon "\nAmTalk has a number of different icons you can choose from. Which one would you like to use?\n")
(set #nonewicon "No - ToolTypes already set.")
(set #yesnewicon "Yes - Copy over Icon.")
(set #whatcat "Select the AmTalk Language catalog you wish to install. (N/A = Not Available in this Archive.)")
(set #wherecat "\nWhere do you wish to install the AmTalk Language Catalog? Default is ")
(set #catnofind "Can not find this catalog in this AmTalk archive. You may need to get the complete archive from the support site.")
(set #whatdocs "\nWhat AmTalk documentation would you like to install?\n")
(set #wheredocs "Where would you like the AmTalk documentation you selected to be installed?")
(set #inetdfound "The install has found that a Inetd.conf is installed for AmiTCP or AS225/IW225/CPR225. In order for AmTalk to work correctly the 'ntalk' & 'talk' entries must be commented out or removed. The installer can *comment* out the entries if they are found.\n\nIf you are running a 'TCP/IP' package like Miami or TTCP you have to do this manually for their stuff.")
(set #skipinetd "\n\n(You can Skip this now if you have already changed your Inetd.conf or you have let the installer do this before.)")
(set #skip "Skip - Do later")
(set #comment "Have Installer Do It")
(set #ifucomment "\n\nIf you had commented out or removed the\n'talk 517/udp' & 'ntalk 518/udp'\n entries in your db/services file, you will need to add them back in. By default they should already be there.")
(set #manualchange "\n\nCurrently the AmTALK installer does not edit or change the 'DataBase' list or config-file for server entries. If your TCP/IP package is setup for using another TALK client you must remove that other clients entries by hand for AmTALK to work correctly.")
(message "The AmTALK installer has not been test with every TCP package and options. It has been tested with & works with Amitcp 3.0b2 & 4.0. There are to many options to test with 4 TCP stacks & all the different config files. If you have any problems email vgr@best.com.\n\n The installer will copy the files to the correct place, but as far as setting up non-Amitcp config files the installer does not do this as of yet & will tell you so. It does set the ENVARC MiamiChangeDB & does the arexx command CHANGEDB for Miami.")
(set #updateinstaller "\nJust to let you know ESCOM AG has released a new version of the installer program.\n\n\nVersion 43.3 can be found on Aminet in:\n\n/util/misc/Installer-43_3.lha\n\n\nYou might want to upgrade soon, if you can. The AmTalk installer will need it.")
(set #whattcp "\nPlease select the Networking package you run.\n")
(set #nottcp "\n\nCurrently Termite TCP does not work with AmTalk.\n\nIt's known that certain TermiteTCP versions don't properly emulate bsdsocket.library. Use it on your own risk.")
(set #nomlink "\n\nCurrently Mlink does not work with AmTalk. AmTalk needs access to root ports, currently Mlink does not provide this.")
(set #wi "AmTalk can be started a few different ways, please pick one.")
(set #wi0 " Entry in Inetd.conf (Amitcp Only)")
(set #wi1 " Entry in startnet (Amitcp Only)")
(set #wi2 " Add to Miami's 'Database'")
(set #wi3 " None - Manual Start")
(set #whereident "Please select the *Inetd.conf* file.")
(set #add2 "\nThe installer will now add the AmTalk entry to the end of your Inetd.conf file that you selected & will make a backup called 'Inetd.conf.amtalk'.\n\n If you are running a 'TCP/IP' package like Miami or TTCP you have to do this manualy in its server-list or database files.\n\nIf you wish to add the entry by hand later select 'Skip' now.")
(set #skip2 "Skip - Do by Hand")
(set #comment2 "Have Installer Do It")
(set #noinetdas225 "\n\nCurrently starting AmTALK from db/Inetd.conf does not work please pick another option.")
(set #noinetdother "\n\nThe TCP/IP stack you selected does not have a db/Inetd.conf. Please pick another option.")
(set #noinetdas225S "\n\nCurrently starting from a script is not supported in the installer.")
(set #noinetdotherS "\n\nThe TCP/IP stack you selected does not have a 'startnet' file. Please pick another option. You will need to add an entery by hand.")
(set #wherestartnet "Please select the *startnet* file.")
(set #add3 "\nThe installer will now create 'amitcp:bin/startAmTalk.rexx' and insert 1 line in your startnet file that will run AmTALK when you start AmiTCP & it will make a backup called 'startnet.amtalk'.\n\n If you are running a 'TCP/IP' package like Miami or TTCP you have to do this manualy in its "statnet" config/startup script\n\nIf you wish to add the entry by hand later select 'Skip' now.")
(set #updatesetpatch "\nThe installer looked for 'c:setpatch' and did not find it or you have a version lower then 40.16. AmTalk needs version 40.16 to work correctly. You wany want to upgrade soon. (NOTE: if you keep 'setpatch' in a different place than 'c:' and its 40.16 or higher then this message is void.)")
